Skip to main content

Powertec

Coaxial Surge Protector N Female to N Female, DC to 3 GHz

0 review Write a Review
Powertec's range of RF Surge Protectors provide affordable and reliable protection against dangerous electromagnetic pulses caused by nearby lightning strikes.
SKU: ACC-BH-00002
MPN: PCM-SP-DC3.N2N2
Shipping: Calculated at Checkout
$73.45 inc GST
$63.87 ex GST
Hurry up! Current stock:
Out of stock

Coaxial Surge Protector N Female to N Female, DC to 3 GHz

$73.45 inc GST
$63.87 ex GST

N Female to Female surge protectors are most commonly installed inline between the donor antenna feeder cable and the equipment patch cable. With an N Female Bulkhead interface, the surge protector can be mounted through a plate. Surge protection is recommended for all roof mounted antenna installations where the risk of a lightning surge is high and the cost associated with equipment damage outweighs the cost to implement a lightning protection system. Consult AS/NZS 1768:2007 risk management process, or talk to your Powertec Project Engineer.

  • Suitable for 4G frequencies from DC to 3 GHz
  • N Female Bulkhead to N Female interfaces
  • Gas discharge tube design
  • Ring terminal suitable for 6 mm earth cable
  • Requires connection to ground per AS/ASCIF S009.

The implementation of a lightning protection system is recommended in not only protecting the warranty of equipment, but the warranty of any sensitive electrical equipment located in the building. Failure to implement reasonable lightning protection measures may also void insurance policies held by the building owner.

Electrical Specifications
Frequency Range, MHz 0-3000
VSWR ≤1.2
Input Impedance, Ω 50
Insertion Loss, dB <0.3
Nominal DC Spark-over voltage (100V/μs) 230±20%
Maximum impulse Spark-over voltage (1kV/μs) 650V
Impulse discharge current (8/20μs,10times) 20KA
Impulse discharge current (10/1000μs,300times) 100A
Mechanical Durability Mating cycles ≥500
Mechanical Specifications
Connector Side A Type N Female Bulkhead
Connector Side B Type N Female
Connector Body Nickel Plated Brass
Pin Material Gold Plated Brass
Ground Connection By feed through or Screw Terminal
ROHS Compliant Yes
Environmental Specifications
Ingress Protection IP67
Operating Temperature, deg C -55 to +155
General Information
Manufacturer: Powertec
Manufacturer Part Number: PCM-SP-DC3.N2N2
Barcode: 9337692000119
Packaging Details
Weight: 0.10 KGS
Width: 4.00 (cm)
Height: 4.00 (cm)
Depth: 7.00 (cm)

Customers Also Viewed

Review Your Cart Close Close
Your cart is empty

Recently viewed

Social

Recently Viewed Recently Viewed
Social Media Social Media
Top Top