Skip to main content

Boosting Mobile Signals

Nextivity solutions have you covered throughout the day - where you Work, Live, and Go

As the largest distributor of all CEL-FI products in Australia & New Zealand, Powertec Wireless Technology is helping Australians enjoy mobile phone signal in their vehicles, boats, offices, buildings and homes.

In today’s connected world, reliable mobile phone service and mobile data is essential to business, home and in vehicles where a single phone call can make or break a deal or put a worrying mind at ease, however mobile networks can only be built to cover so far. Many of us can find ourselves out west, behind hills, in the bush, or even a basement where a phone signal can’t reach.

CEL-FI GO's product line includes the first carrier-class cellular coverage solutions to offer industry-leading signal gain. Through Nextivity proprietary, award-winning Intelliboost® technology and signal processing, In addition to delivering the best voice and data performance in their class, GO systems are guaranteed to be unconditionally network safe and do not interfere with other wireless devices which is why they are the only Carrier Approved Mobile Signal Boosters in Australia.

Benefits of Nextivity CEL-FI Mobile Signal Boosters

Nextivity CEL-FI repeaters are the only consumer mobile phone repeater that has been widely approved by all mobile carriers in Australia. Currently approved for use on the Telstra, Optus and Vodafone mobile networks, CEL-FI is a new type of mobile enhancement device called a Smart Repeater.

CEL-FI repeaters comply with Australian Communications and Media Authority (ACMA) regulations. This compliance is essential as it ensures that the use of the device is legal and does not interfere with the broader mobile network. It also means that users can boost their mobile signal without the risk of incurring penalties or causing network issues. Nextivity CEL-FI Smart Repeaters are the only celluar signal boosters/repeaters that have been declared exempt under Schedule 1 of the Radiocommunications Equipment (General) Rules 2021. The current list of exempt models can be found here.

Australia's vast and varied landscape includes numerous remote areas where cellular signal is weak or non-existent. The CEL-FI mobile signal repeater addresses this issue by significantly boosting signal strength. This is particularly beneficial for residents and businesses in rural or remote areas of Australia who often struggle with poor mobile reception.

Improved signal strength means reliable communication, essential for both personal and business purposes. It ensures that emergency calls can be made without disruption, a critical factor in remote locations. Additionally, for industries like mining and agriculture, which are prevalent in remote Australian areas, consistent and strong cellular signals are vital for operations and safety.

A lesser-known yet significant advantage of using a CEL-FI repeater is the extended battery life of mobile devices. When in areas of weak signal, mobile phones and tablets expend extra energy constantly searching for a better signal, which drains the battery quickly. By providing a stronger signal, the CEL-FI repeater reduces the need for this constant search, thereby conserving battery life.

For Australians who are often on the move or live in areas with poor reception, this means less frequent charging and longer periods of mobile phone usability. It is especially beneficial for those who rely on their mobile devices for long periods, such as travelers, remote workers, and emergency service personnel.

Slow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal in your home you will be able to relate to the frustration of trying to access email or the internet.

The CEL-FI will amplify the mobile signal and increase your data speeds dramatically. Email, internet, video and social networking speeds will be like you never left the office.

Installing a CEL-FI is a simple 6 step process.

  • Install the Donor Antenna

  • Install the Server Antenna(s)

  • Mount the CEL-FI

  • Connect the Donor and Server Antenna(s)

  • Connect the power to the CEL-FI unit

  • Activate and Optimse your Setup via the CEL-FI Wave App

Once installed, mainting your CEL-FI can all be handle all within the CEL-FI Wave App.

Smart Cellular Signal Boosters for Where you Live

 CEL-FI ROAM R41 Thumbnail

CEL-FI ROAM R41

Overview

One of the most exciting developments in mobile technology came when in 2017 Powertec launched the CEL-FI GO mobile model. The beauty of this device meant that for the first time ever mobile phone signal could be boosted in a small area, such as inside a car or truck. Today, the GO mobile series has been replaced by the ROAM series.

CEL-FI ROAM R41 is a plug-and-play mobile signal booster that keeps you connected on the road or water. Suitable for cars, 4WD, Trucks, Fleet, Caravan/RV, and boats. ROAM R41 ensures you have reliable voice and data in transit with up to 100dBm of system gain.

Available Carriers

Approved by Telstra / Optus / Vodafone - TPG / Currently waiting aproval in NZ

Networks / Bands Supported

3G / 4G / 5G DSS (Dynamic Spectrum Sharing)
1 / 3 / 5 / 7 / 8 / 20 / 26 / 28L
700L / 850 / 900 / 1800 / 2100 / 2600 + B26

Simultaneous Band Relay

One

Power per Band UL/DL

Download: 0 dBm
Upload: Up to 24 dBm

Indicative Data Throughput

70Mbps

Ingress Protection Rating

IPX0

Input Voltage

11-5 to 15 VDC

Power Consumption max.

18W

WAVE App

Connectivity: Bluetooth
Carrier Switching: Yes (Telstra/Optus/Vodafone)
Stationary/Mobile Switching No (Mobile only)

MyWave Support

Yes

Environmental

Operating Temperature: 0 to 60°C
Non-condensing Humidity: 0 to 95%

Smart Cellular Signal Boosters for Where you Live

CEL-FI GO G41 Thumbnail

CEL-FI GO G41

CEL-FI GO G51 Thumbnail

CEL-FI GO G51

Overview

The CEL-FI GO G41 combines unmatched performance with ease of installation, CEL-FI GO G41 is a single-operator mobile signal booster that delivers reliable in-building 4G and 5G connectivity for homes, “small box” retail stores, and branch offices.

The CEL-FI GO G51 is compact, easy-to-use, and does not require manual configuration, making it easier than ever before for building owners to equip their buildings with 5G connectivity and ensure better voice quality, 5G data speeds, and fewer dropped calls.

Available Carriers

Approved by Telstra, Optus, Vodafone / TPG, Spark, 2degrees, OneNZ, Digicel Fiji

Approved by Telstra, Optus

Networks / Bands Supported

2G / 3G / 4G / 5G DSS (Dynamic Spectrum Sharing)
1 / 3 / 5 / 7 / 8 / 20 / 28L / 28U / 40
700L / 850 / 900 / 1800 / 2100 / 2300 / 2600

2G/3G/4G/5G
1 / 3 / 5 / 7 / 8 / 20 / 28L / n78

Simultaneous Band Relay

Two

Two
(5G 3500 + another 3G / 4G / 5G band)

Power per Band UL/DL

Download: 20 dBm
Upload: Up to 20/22 dBm

Download: 20 dBm
Upload: Up to 20/22 dBm
n78 DL: 27 dBm / UL: 24 dBm

Indicative Data Throughput

140Mbps

140+Mbps

Ingress Protection Rating

IP20

IPX0

Input Voltage

12 VDC (240V Adaptor)

12 VDC (240V Adaptor)

Power Consumption max.

30W

60W

WAVE App

Connectivity: Bluetooth / Ethernet
Carrier Switching: Yes
Stationary/Mobile Switching No (Stationary only)

Connectivity: Bluetooth / Ethernet
Carrier Switching: Yes
Stationary/Mobile Switching No (Stationary only)

MyWave Support

No

No

Environmental

Operating Temperature: 0 to 40°C
Non-condensing Humidity: 0 to 95%

Operating Temperature: 0 to 40°C
Non-condensing Humidity: 0 to 95%

Smart Cellular Signal Boosters for Where you Work

CEL-FI GO G51 Thumbnail

CEL-FI GO G51

CEL-FI GO G43 Thumbnail

CEL-FI GO G43

Overview

The CEL-FI GO G51 is compact, easy-to-use, and does not require manual configuration, making it easier than ever before for building owners to equip their buildings with 5G connectivity and ensure better voice quality, 5G data speeds, and fewer dropped calls.

The CEL-FI GO G43 is designed to offer retailers, stores, restaurants, caravan parks and other small businesses a fast way to solve in-building mobile coverage challenges, the CEL-FI GO G43 is a multi-operator cellular coverage solution that ensures reliable in-building 3G, 4G, and 5G connectivity for up to three Mobile Network Operator (MNO) signals.

Available Carriers

Approved by Telstra, Optus

Pending Approval

Networks / Bands Supported

3G / 4G / 5G
1 / 3 / 5 / 7 / 8 / 20 / 28L / n78

3G / 4G / 5G
1 / 3 / 5 / 7 / 8 / 20 / 28L / 28U / 40

Simultaneous Band Relay

Two
(5G 3500 + another 3G / 4G / 5G band)

Six

Power per Band UL/DL

Download: 20 dBm
Upload: Up to 20/22 dBm
n78 DL: 27 dBm / UL: 24 dBm

Download: 14 dBm
Upload: Up to 20/22 dBm

Indicative Data Throughput

140+Mbps

140+Mbps

Ingress Protection Rating

IPX0

IPX0

Input Voltage

12 VDC (240V Adaptor)

12 VDC (240V Adaptor)

Power Consumption max.

60W

102W

WAVE App

Connectivity: Bluetooth / Ethernet
Carrier Switching: Yes
Stationary/Mobile Switching: No (Stationary only)

Connectivity: Ethernet
Carrier Switching: No
Stationary/Mobile Switching: No (Stationary only)

MyWave Support

No

No

Environmental

Operating Temperature: 0 to 40°C
Non-condensing Humidity: 0 to 95%

Operating Temperature: 0 to 40°C
Non-condensing Humidity: 0 to 95%

Smart Cellular Signal Boosters for Enterprise Installations

CEL-FI GO G43 Thumbnail

CEL-FI GO G43

CEL-FI QUATRA 4000e Thumbnail

CEL-FI QUATRA 4000

Overview

The CEL-FI GO G43 is designed to offer retailers, stores, restaurants, caravan parks and other small businesses a fast way to solve in-building mobile coverage challenges, the CEL-FI GO G43 is a multi-operator cellular coverage solution that ensures reliable in-building 3G, 4G, and 5G connectivity for up to three Mobile Network Operator (MNO) signals.

The CEL-FI QUATRA 4000e solves mobile signal coverage challenges for enterprise environments, CEL-FI QUATRA 4000e is a multi-carrier Active DAS Hybrid that offers uniform, high-quality cellular signal throughout any building. As an all-digital solution, QUATRA 4000e utilises category cabling for RF and Power-over-Ethernet architecture to deliver industry-leading signal gain and scalability.

Available Carriers

Pending Approval

Pending Approval

Networks / Bands Supported

3G / 4G / 5G
1 / 3 / 5 / 7 / 8 / 20 / 28L / 28U / 40

3G / 4G / 5G
1 / 3 / 7 / 8 / 20 / 40*

Simultaneous Band Relay

Six

Six

Power per Band UL/DL

Download: 14 dBm
Upload: Up to 20/22 dBm

Download: 14 dBm
Upload: Up to 20/22 dBm

Indicative Data Throughput

140+Mbps

140+Mbps

Ingress Protection Rating

IPX0

IPX0

Input Voltage

12 VDC (240V Adaptor)

85-264 VAC IEC

Power Consumption max.

102W

480W Max.

WAVE App

Connectivity: Ethernet
Carrier Switching: No
Stationary/Mobile Switching: No (Stationary only)

Connectivity: Ethernet
Carrier Switching: No
Stationary/Mobile Switching: No (Stationary only)

MyWave Support

No

No

Environmental

Operating Temperature: 0 to 40°C
Non-condensing Humidity: 0 to 95%

Operating Temperature: 0 to 40°C
Non-condensing Humidity: 0 to 95%

Frequently Asked Questions

What makes CEL-FI so different from other mobile signal boosters?

CEL-FI mobile signal boosters are a smart signal boosters due to their industry-leading signal gain, intelligent boosting technology, and carrier-approved status. Unlike traditional boosters that amplify all signals indiscriminately, CEL-FI devices focus on enhancing the specific carrier signal required, providing up to 100dB gain for robust coverage even in challenging environments without compromising or interfering with your mobile operator’s networks or impeding other subscribers’ signals. This targeted approach ensures optimal performance without interfering with other networks, making CEL-FI a reliable, legal and efficient choice for improving mobile reception.

CEL-FI has been recognised for its superior design and effectiveness and is the only consumer booster authorised for use by ACMA, the Australian Communications and Media Authority, and in other countries such as New Zealand and the UK.CEL-FI are the only cellular repeaters to be approved by network operators Telstra, Optus and Vodafone.

Does a CEL-FI Mobile Signal Booster support voice and data or voice only?

Yes, CEL-FI smart signal boosters can support both voice and data simultaneously.

Can CEL-FI boost the signal of multiple cellular networks at once?

CEL-FI signal boosters are operator specific, and will only boost one Operator’s channels at a time. Being Operator specific is one of the main reasons that CEL-FIs are network safe and can provide 100 dB of signal gain, and why they are the only signal booster approved by a growing number of Operators.


Contact us Today to Help with your Mobile Coverage Problems

Review Your Cart Close Close
Your cart is empty

Recently viewed

Social

Recently Viewed Recently Viewed
Social Media Social Media
Top Top