Upgrade your CEL-FI GO to the new CEL-FI GO G41
Same Day
Shipping for
Online Orders
Before 1pm

30 day
Money Back
Guarantee

In-Stock

Blackhawk 4G-5G LPDA Antenna, 698 to 4000 MHz, N Female + 10m Cable N Male to SMA Male

SKU: ANT-BH-YG-LOG-LPDA-10

Price includes GST

$310.27

The Blackhawk LPDA Antenna is one of the most popular external antenna solutions for poor 3G / 4G voice and data service. This one antenna can be used on any mobile network, in any area without worrying about compatibility. It is the ideal roof-mounted antenna for CEL-FI repeaters.

The LPDA antenna covers all cellular bands between the 700 and 4000 MHz range with a high peak gain which projects maximum energy in the direction of the cell tower, while maintaining a wide enough beam to capture signal reflections off nearby buildings, hills, and signal scattered by trees.

Features:

  • 11.3 dBi peak gain across lower bands 698 to 960 MHz
  • 11.5 dBi peak gain across bands 1695 to 2700 MHz
  • 9.5 dBi gain across upper bands 3300 to 4000 MHz
  • Ruggedized construction for Australian conditions
  • Fully welded, powder coat aluminium design
  • Stainless steel mounting clamp included
  • 30 cm tail with pre-terminated N Female connector + 10m LMR 240 cable
  • Ideal for Telstra, Optus, and One 3G, 4G & 5G

In Stock

The Blackhawk LPDA Antenna provides an ideal solution for 3G/ 4G voice and data applications. With the rollout of new 3G, 4G and even 5G frequencies, traditional Yagi antennas just haven’t been able to keep up. LPDA antennas allow a single antenna to cover all frequencies with the high gain of a Yagi antenna that rural and remote areas demand. This one antenna can be used on any mobile phone network in Australia, in any area without worrying about compatibility.

A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptional wide-band performance by phasing a series of elements together, much like an ordinary Yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.

Features

  • 12 dBi gain across lower bands 698-960 MHz
  • 14 dBi gain across bands 1710-2700 MHz
  • 12 dBi gain across upper bands 3300-4000 MHz
  • Ruggedised construction for Australian conditions
  • Fully welded, powder coat aluminium design
  • Stainless steel mounting clamp included
  • 30 cm tail with pre-terminated N Female connector
  • Ideal for high-speed 3G and 4G LTE applications.
  • Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G

MECHANICAL SPECIFICATIONS

Input ConnectorN Female
Cable30 cm cable tail
Lightning ProtectionDC Ground
Radiator MaterialFully welded aluminium, black powder coat
MountingStainless Steel, pole mount Ø30-50 mm
Dimensions1240 x 200 x 60 mm
Packing Dimensions1290 x 210 x 90 mm
Weight2.2 kg
Rated Wind Velocity192 km/h
Operating Temperature-40 to +65°C

ELECTRICAL SPECIFICATION

Frequency Range (MHz)698-960 / 1710-2700/ 3300-4000
Input Impedance50 Ω
Peak Gain12 / 14 dBi
VSWR≤2.5:1 / ≤1.8:1
PolarisationVertical, linear
Horizontal Beam-width55 / 42°
Vertical Beam-width46 / 34°

Maximum Input Power

50 W

Weight2.5 kg
Dimensions9 × 25 × 136 cm
Cabling

No Cable, 10m LMR240 SMA/m – N/m Cable, 20m LMR240 SMA/m – N/m Cable

Reviews

There are no reviews yet.

Be the first to review “Blackhawk 4G-5G LPDA Antenna, 698 to 4000 MHz, N Female + 10m Cable N Male to SMA Male”

 
Cart