Choosing a Server Antenna for the CEL-FI ROAM R41 Home and Small Building Pack
Posted by Powertec on 19 Feb, 2024
Want to know which server antenna to use with the R41 Small Building Pack?
We will run through some features of each antenna so you can make a more educated decision on which antenna to choose
Product Page: Nextivity CEL-FI R41 Small Building LPDA
The most important factor is getting your donor antenna outdoors up high as possible to receive the best signal, and ensure you isolate the donor and server antennas as much as possible from each other. The input signal and isolation can be checked using the free CEL-FI WAVE App.
Server Antenna (indoor)
Provides a boosted mobile signal to your phone and cellular devices
Blackhawk Indoor Wall Mount Panel
Blackhawk 4G-5G Indoor Wall Mount Panel Antenna, 698 to 4000 MHz, N Female
- Wall mounted
- Directional – pushes the signal in one direction
- Ideally needs to be mounted at one end of the van, could also be used to push the signal outdoors as well
- Get up to 15m of coverage at a 65-degree angle from the antenna in ideal circumstances (with great signal input and high isolation between the donor and server antenna)
Blackhawk 4G-5G Ceiling Dome Antenna
Blackhawk 4G-5G Ceiling Dome Antenna, 698 to 4000 MHz, N Female
- Ceiling mounted
- Omni directional – puts our even coverage in all directions
- Ideally placed in a central area of the van
- Get up to 8m of coverage around the antenna in ideal circumstances (good signal input and great isolation between the donor and server antenna)